The first pass sized the pocket for 19x12x3.2mm weights (from generic reference material) but the weights I actually have are 20x17x4mm — way chunkier. Tried squeezing the larger pocket into the existing wedge first and punched through the body on the back, so this swap adds a small 10mm plinth under the stand and routes the pocket up through it into the body. Along the way I hit a silly scope bug where the pocket difference() only applied to the plinth, so even though I thought we had 18mm of depth we were really only cutting the 10mm of plinth — hence two layers of weights fitting instead of four. Pocket cut now wraps the union of stand + plinth, rib unions back in at the end. One heads-up: the watch holder still prints at its original height on the build plate, so it's now 10mm low relative to the mounting spot on the stand. Prop it on something or print a riser when gluing them. Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>