Something went wrong. Try again.
My NixOS dotfiles
Something went wrong. Try again.
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177################################### WINAPPS CONFIGURATION FILE ###################################
# INSTRUCTIONS# - Leading and trailing whitespace are ignored.# - Empty lines are ignored.# - Lines starting with '#' are ignored.# - All characters following a '#' are ignored.
# [WINDOWS USERNAME]RDP_USER="Simon"
# [WINDOWS PASSWORD]# NOTES:# - If using FreeRDP v3.9.0 or greater, you *have* to set a password# - RDP_ASKPASS is provided as a more secure option to RDP_PASS:# - Calls an external command and uses its stdout as the password# - The password is not passed on the command line to freerdp, keeping it out of logs# - If specified, takes precedence over RDP_PASS# - Examples to use this:# - RDP_ASKPASS="~/some-custom-command"# - RDP_ASKPASS="bash -c 'cat ~/.some-secret-file'"# - RDP_ASKPASS="bash -c 'kwallet-query --folder winapps --read-password rdp kdewallet'"#RDP_PASS="Windows"RDP_ASKPASS=""
# [WINDOWS DOMAIN]# DEFAULT VALUE: '' (BLANK)RDP_DOMAIN=""
# [WINDOWS IPV4 ADDRESS]# NOTES:# - If using 'libvirt', 'RDP_IP' will be determined by WinApps at runtime if left unspecified.# DEFAULT VALUE:# - 'docker': '127.0.0.1'# - 'podman': '127.0.0.1'# - 'libvirt': '' (BLANK)RDP_IP="127.0.0.1"
# [RDP PORT]# NOTES:# - For Docker and Podman, this is the host port mapped to Windows port 3389.# - If you changed the host-side RDP port in compose.yaml, set this to match.# DEFAULT VALUE: '3389'RDP_PORT="3389"
# [VM NAME]# NOTES:# - Only applicable when using 'libvirt'# - The libvirt VM name must match so that WinApps can determine VM IP, start the VM, etc.# DEFAULT VALUE: 'RDPWindows'VM_NAME="RDPWindows"
# [WINAPPS BACKEND]# DEFAULT VALUE: 'docker'# VALID VALUES:# - 'docker'# - 'podman'# - 'libvirt'# - 'manual'WAFLAVOR="docker"
# [DISPLAY SCALING FACTOR]# NOTES:# - If an unsupported value is specified, a warning will be displayed.# - If an unsupported value is specified, WinApps will use the closest supported value.# DEFAULT VALUE: '100'# VALID VALUES:# - '100'# - '140'# - '180'RDP_SCALE="100"
# [MOUNTING REMOVABLE PATHS FOR FILES]# NOTES:# - By default, `udisks` (which you most likely have installed) uses /run/media for mounting removable devices.# This improves compatibility with most desktop environments (DEs).# ATTENTION: The Filesystem Hierarchy Standard (FHS) recommends /media instead. Verify your system's configuration.# - To manually mount devices, you may optionally use /mnt.# REFERENCE: https://wiki.archlinux.org/title/Udisks#Mount_to_/mediaREMOVABLE_MEDIA="/run/media"
# [ADDITIONAL FREERDP FLAGS & ARGUMENTS]# NOTES:# - You can try adding /network:lan to these flags in order to increase performance, however, some users have faced issues with this.# If this does not work or if it does not work without the flag, you can try adding /nsc and /gfx.# DEFAULT VALUE: '/cert:tofu /sound /microphone +home-drive'# VALID VALUES: See https://github.com/awakecoding/FreeRDP-Manuals/blob/master/User/FreeRDP-User-Manual.markdownRDP_FLAGS="/cert:tofu /sound /microphone +home-drive"
# [NON FULL WINDOWS RDP FLAGS]# NOTES:# - Use these flags to pass specific flags to the freerdp command when you are starting a non-full RDP session (any other command than winapps windows)# DEFAULT_VALUES: ''# VALID_VALUES: See https://github.com/awakecoding/FreeRDP-Manuals/blob/master/User/FreeRDP-User-Manual.markdownRDP_FLAGS_NON_WINDOWS=""
# [FULL WINDOWS RDP FLAGS]# NOTES:# - Use these flags to pass specific flags to the freerdp command when you are starting a full RDP session (winapps windows)# DEFAULT_VALUES: ''# VALID_VALUES: See https://github.com/awakecoding/FreeRDP-Manuals/blob/master/User/FreeRDP-User-Manual.markdownRDP_FLAGS_WINDOWS=""
# [DEBUG WINAPPS]# NOTES:# - Creates and appends to ~/.local/share/winapps/winapps.log when running WinApps.# DEFAULT VALUE: 'true'# VALID VALUES:# - 'true'# - 'false'DEBUG="true"
# [AUTOMATICALLY PAUSE WINDOWS]# NOTES:# - This is currently INCOMPATIBLE with 'manual'.# DEFAULT VALUE: 'off'# VALID VALUES:# - 'on'# - 'off'AUTOPAUSE="off"
# [AUTOMATICALLY PAUSE WINDOWS TIMEOUT]# NOTES:# - This setting determines the duration of inactivity to tolerate before Windows is automatically paused.# - This setting is ignored if 'AUTOPAUSE' is set to 'off'.# - The value must be specified in seconds (to the nearest 10 seconds e.g., '30', '40', '50', etc.).# - For RemoteApp RDP sessions, there is a mandatory 20-second delay, so the minimum value that can be specified here is '20'.# - Source: https://techcommunity.microsoft.com/t5/security-compliance-and-identity/terminal-services-remoteapp-8482-session-termination-logic/ba-p/246566# DEFAULT VALUE: '300'# VALID VALUES: >=20AUTOPAUSE_TIME="300"
# [FREERDP COMMAND]# NOTES:# - WinApps will attempt to automatically detect the correct command to use for your system.# DEFAULT VALUE: '' (BLANK)# VALID VALUES: The command required to run FreeRDPv3 on your system (e.g., 'xfreerdp', 'xfreerdp3', etc.).FREERDP_COMMAND=""
# [TIMEOUTS]# NOTES:# - These settings control various timeout durations within the WinApps setup.# - Increasing the timeouts is only necessary if the corresponding errors occur.# - Ensure you have followed all the Troubleshooting Tips in the error message first.
# PORT CHECK# - The maximum time (in seconds) to wait when checking if the RDP port on Windows is open.# - Corresponding error: "NETWORK CONFIGURATION ERROR" (exit status 13).# DEFAULT VALUE: '5'PORT_TIMEOUT="5"
# RDP CONNECTION TEST# - The maximum time (in seconds) to wait when testing the initial RDP connection to Windows.# - Corresponding error: "REMOTE DESKTOP PROTOCOL FAILURE" (exit status 14).# DEFAULT VALUE: '30'RDP_TIMEOUT="30"
# APPLICATION SCAN# - The maximum time (in seconds) to wait for the script that scans for installed applications on Windows to complete.# - Corresponding error: "APPLICATION QUERY FAILURE" (exit status 15).# DEFAULT VALUE: '60'APP_SCAN_TIMEOUT="60"
# WINDOWS BOOT# - The maximum time (in seconds) to wait for the Windows VM to boot if it is not running, before attempting to launch an application.# DEFAULT VALUE: '120'BOOT_TIMEOUT="120"
# FREERDP RAIL HIDEF# - This option controls the value of the `hidef` option passed to the /app parameter of the FreeRDP command.# - Setting this option to 'off' may resolve window misalignment issues related to maximized windows.# DEFAULT VALUE: 'on'HIDEF="on"