[platformio]
default_envs = default
build_cache_dir = .cache
extra_configs = platformio.local.ini

[crosspoint]
version = 1.6.5

[base]
platform = https://github.com/pioarduino/platform-espressif32/releases/download/55.03.311/platform-espressif32.zip
board = esp32-c3-devkitm-1
framework = arduino
monitor_speed = 115200
upload_speed = 921600
check_tool = cppcheck
; missingInclude (project headers) is suppressed alongside missingIncludeSystem: on a
; fresh CI checkout cppcheck has no resolved include paths, so it reports every
; project header as missing (~400 information-level lines) and fails the job.
check_flags =
  --enable=all
  --check-level=exhaustive
  --suppress=missingIncludeSystem
  --suppress=missingInclude
  --suppress=unusedFunction
  --suppress=unmatchedSuppression
  --suppress=*:*/.pio/*
  ; The SDK is maintained separately; keep this check scoped to reader-owned code.
  --suppress=*:*/freeink-sdk/*
  ; Analyzer status output is not a source-code defect.
  --suppress=checkersReport
  --inline-suppr
check_skip_packages = yes

board_upload.flash_size = 16MB
board_upload.maximum_size = 16777216
board_upload.offset_address = 0x10000

build_flags =
  -DARDUINO_USB_MODE=1
  -DARDUINO_USB_CDC_ON_BOOT=1
  -DEINK_DISPLAY_SINGLE_BUFFER_MODE=1
  -DDISABLE_FS_H_WARNING=1
  -DDESTRUCTOR_CLOSES_FILE=1
# https://libexpat.github.io/doc/api/latest/#XML_GE
  -DXML_GE=0
  -DXML_CONTEXT_BYTES=1024
  -std=gnu++2a
# Enable UTF-8 long file names in SdFat
  -DUSE_UTF8_LONG_NAMES=1
# SdFat transfers SPI a byte at a time on ESP32: SdFatConfig.h defaults
# USE_SPI_ARRAY_TRANSFER to 0 for every target but RP2040 and the UNO R4, and each
# Arduino transfer(uint8_t) writes the data register, starts the transfer and spins.
# 1 routes through transfer(buf, count) -> transferBytes() -> spiTransferBytesNL(),
# which batches into the SPI FIFO: ~3x on SD reads, at the cost of a 512-byte stack
# buffer on the send path. Inert on SDMMC boards, which bypass SdFat's SPI driver.
  -DUSE_SPI_ARRAY_TRANSFER=1
# Increase PNG scanline buffer to support up to 2048px wide images
# Default is (320*4+1)*2=2562, we need more for larger images
  -DPNG_MAX_BUFFERED_PIXELS=16416
# FreeInkFont optional FreeType modules. The auto-hinter (~50KB text, PSRAM
# boards only via the vector-font gate) is REQUIRED by the BW-aware 2-bit
# quantizer in TtfEpdFont: with the ink threshold at 50% coverage, unhinted
# thin strokes that straddle pixel columns drop below threshold and break up;
# Light hinting snaps stems to full-coverage pixels so they survive. (An
# earlier "no improvement" A/B was confounded by the old always-ink quantizer
# flooding the differences.) Still OFF: the B/W raster (_MONOCHROME, ~5KB) is
# dead while every TtfEpdFont::load() is 2-bit; psnames (_PSNAMES, ~64KB)
# only serves glyph-NAME lookups a codepoint-driven renderer never makes;
# gzip (_GZIP, ~13KB) only decompresses .gz/WOFF, and the registry accepts
# .ttf/.otf/.ttc.
  -DFREEINK_FONT_ENABLE_AUTOHINT=1
  -DFREEINK_NET_WOLFSSL=1
  -DWOLFSSL_USER_SETTINGS
  -DWOLFSSL_OPTIONS_H
  -DWOLFSSL_CLIENT_EXAMPLE
  -DWOLFSSL_TLS13
# MEMFIX-PORT: single-precision ECC (sp_c32.c). Without it every P-256 operation
# (TLS 1.3 key_share keygen, ECDHE, ECDSA cert verify) runs on fast-math bignums
# that WOLFSSL_SMALL_STACK heap-allocates at FP_MAX_BITS size -- tens of KB of
# temporaries, which OOMs (MP_MEM) at the ~50KB free heap a reading session
# leaves. SP uses fixed 256-bit arrays: a few KB, and several times faster.
# SP_SMALL trades the large precomputed point tables for smaller flash.
  -DWOLFSSL_HAVE_SP_ECC
  -DWOLFSSL_SP_SMALL
# Arduino-wolfSSL's user_settings.h enables TLS extensions, supported curves,
# HKDF, and RSA-PSS when WOLFSSL_TLS13 is set. Do not repeat those defines here:
# GCC reports every library translation unit as a macro redefinition.
  -DHAVE_FFDHE_2048
  -DHAVE_CURVE25519
  -DHAVE_SNI
# RFC 6066 max_fragment_length: SecureClient asks the peer for 2KB TLS records
# so the receive path never needs the default ~17KB contiguous buffer -- the
# MEMORY_E mid-download failure at the ~20KB free heap font downloads leave.
# Servers that ignore the extension keep 16KB records and behave as before.
  -DHAVE_MAX_FRAGMENT
  -Wno-bidi-chars
  -Wl,--wrap=panic_print_backtrace,--wrap=panic_abort,--wrap=bootloader_common_check_efuse_blk_validity
  -fno-exceptions

build_unflags =
  -std=gnu++11
  -fexceptions

; Board configuration
board_build.flash_mode = dio
board_build.flash_size = 16MB
board_build.partitions = partitions.csv

; UI languages compiled into the firmware, as comma-separated codes from lib/I18n/translations
; (e.g. "en,de,fr"). English is always included. Languages left out are not offered in the
; language picker; a device whose saved language is not built in falls back to English.
custom_i18n_builtin_langs = all

extra_scripts =
  pre:scripts/patch_pioarduino_cache.py
  pre:scripts/patch_wolfssl.py
  pre:scripts/build_html.py
  pre:scripts/gen_i18n.py
  pre:scripts/git_branch.py
  pre:scripts/patch_jpegdec.py
  post:scripts/register_unit_tests_target.py
  post:scripts/patch_arduino_rom_libc.py

; Libraries
lib_deps =
  BatteryMonitor=symlink://freeink-sdk/libs/hardware/BatteryMonitor
  InputManager=symlink://freeink-sdk/libs/hardware/InputManager
  EInkDisplay=symlink://freeink-sdk/libs/display/FreeInkDisplay
  SDCardManager=symlink://freeink-sdk/libs/hardware/SDCardManager
  UsbMassStorage=symlink://freeink-sdk/libs/hardware/UsbMassStorage
  BoardConfig=symlink://freeink-sdk/libs/hardware/BoardConfig
  XteinkDetect=symlink://freeink-sdk/libs/hardware/XteinkDetect
  PowerManager=symlink://freeink-sdk/libs/hardware/PowerManager
  MemoryManager=symlink://freeink-sdk/libs/hardware/MemoryManager
  FrontlightManager=symlink://freeink-sdk/libs/hardware/FrontlightManager
  Rtc=symlink://freeink-sdk/libs/hardware/Rtc
  Imu=symlink://freeink-sdk/libs/hardware/Imu
  SecureNet=symlink://freeink-sdk/libs/network/SecureNet
  FreeInkUI=symlink://freeink-sdk/libs/ui/FreeInkUI
  Icons=symlink://freeink-sdk/libs/assets/Icons
  ; Standalone FreeType/stb TTF engine backing lib/EpdFont/TtfEpdFont (runtime
  ; .ttf/.otf rendering). Vendors only stb_truetype + FreeType (no expat), so it
  ; does not hit the FreeInkBook duplicate-XML_* symbol problem.
  FreeInkFont=symlink://freeink-sdk/libs/font/FreeInkFont
  bblanchon/ArduinoJson @ 7.4.2
  ricmoo/QRCode @ 0.0.1
  bitbank2/PNGdec @ 1.1.6
  https://github.com/bitbank2/JPEGDEC.git#86282979224c8a32fd51e091ed5a35b0c699a52b
  links2004/WebSockets @ 2.7.3
  wolfssl/Arduino-wolfSSL @ 5.7.2

lib_ignore =
  BLE

; The standard firmware profiles reclaim heap by rebuilding the Arduino core.
; USB-OTG (FREEINK_CAP_USB_MSC) profiles like the X4 Pro and Paper Mono
; intentionally do not inherit this section: they need PioArduino's complete
; prebuilt TinyUSB component graph, which the custom core rebuild omits.
[firmware_tuned]
; MEMFIX-PORT: custom_sdkconfig heap reclamation (~32-37 KB). Rebuilds the
; Arduino core libs on first build (slower once, cached after; needs the CMake
; pin in platformio.local.ini on macOS).
;
; If an interrupted rebuild fails with "multiple definition of 'app_main'"
; (stale generated scaffold), clean it up with:
;   rm -rf .dummy CMakeLists.txt sdkconfig.default sdkconfig.defaults .pio/build/default
; Do NOT use `git clean -fdX` — it deletes platformio.local.ini.
custom_sdkconfig =
  ; Task stack right-sizing from measured high-water marks (heap block map +
  ; per-task stack audit, July 2026): esp_timer used ~0.8 KB of 8 KB across
  ; every capture; the FreeRTOS timer service used ~0.5 KB
  ; of 4 KB. Neither runs TLS or app code. ~7 KB back to the heap.
  CONFIG_ESP_TIMER_TASK_STACK_SIZE=4096
  CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH=2560
  ; Move the WiFi stack's non-critical hot paths out of IRAM into flash.
  ; On the C3, IRAM and DRAM share one SRAM pool, so the ~25-30 KB this
  ; frees lands directly in the heap — paid for with lower WiFi throughput
  ; during transfers (occasional sync/OTA use, not streaming: acceptable).
  ; IRAM cost is static, so the heap gain applies even with WiFi off.
  CONFIG_ESP_WIFI_IRAM_OPT=n
  CONFIG_ESP_WIFI_RX_IRAM_OPT=n
  ; Keep the Arduino wrappers for the removed cloud components (below) out of
  ; the core source list; all other bundled libraries default to enabled.
  CONFIG_ARDUINO_SELECTIVE_COMPILATION=y
  CONFIG_ARDUINO_SELECTIVE_RainMaker=n
  CONFIG_ARDUINO_SELECTIVE_Insights=n
  ; ESP_SR (speech recognition) only exists in the S3 core; its wrapper includes
  ; ESP_I2S.h, which the isolated core rebuild can't resolve. Unused here anyway,
  ; so drop it or the sticky env fails to build.
  CONFIG_ARDUINO_SELECTIVE_ESP_SR=n
  ; esp-modbus requires its API blocking limit to cover the response timeout.
  CONFIG_FMB_MASTER_MAX_API_BLOCKING_TIME_MS=10000

; Drop unused cloud components from the core rebuild. esp_insights/rainmaker
; require embedded server certs the lib builder can't generate
; ("https_server.crt.S not found"); this firmware uses none of them.
custom_component_remove =
  espressif/esp_insights
  espressif/esp_rainmaker
  espressif/esp_diagnostics
  espressif/esp_diag_data_store
  espressif/esp_schedule
  espressif/esp_rcp_update
  espressif/esp_secure_cert_mgr
  espressif/cbor

; Keep C3-specific defaults separate from the S3 firmware profiles.
[firmware_tuned_c3]
extends = firmware_tuned
custom_sdkconfig =
  ${firmware_tuned.custom_sdkconfig}
  ; Use ROM libc routines to preserve the C3's shared instruction/data RAM.
  CONFIG_LIBC_OPTIMIZED_MISALIGNED_ACCESS=n
  ; Match the configurable defaults from the Arduino 3.3.7 build.
  CONFIG_BT_NIMBLE_CRYPTO_STACK_MBEDTLS=y
  CONFIG_BT_NIMBLE_EXT_SCAN=y
  CONFIG_ESP_IPC_TASK_STACK_SIZE=1024
  CONFIG_ESP_RMAKER_WORK_QUEUE_TASK_STACK=4096
  CONFIG_ESP_WIFI_GCMP_SUPPORT=n
  CONFIG_FMB_MASTER_TIMEOUT_MS_RESPOND=3000
  CONFIG_FMB_QUEUE_LENGTH=20
  CONFIG_FMB_TCP_CONNECTION_TOUT_SEC=20


[env:default]
extends = base, firmware_tuned_c3
build_flags =
  ${base.build_flags}
  ; CROSSPOINT_VERSION is set by scripts/git_branch.py (includes branch + short SHA)
  -DFREEINK_DEVICE_X4=1
  -DFREEINK_DEVICE_X3=1
  -DENABLE_SERIAL_LOG
  -DCROSSPOINT_WAIT_FOR_USB_SERIAL
  -DLOG_LEVEL=2 ; Set log level to debug for development builds


[env:gh_release]
extends = base, firmware_tuned_c3
build_flags =
  ${base.build_flags}
  -DFREEINK_DEVICE_X4=1
  -DFREEINK_DEVICE_X3=1
  -DCROSSPOINT_VERSION=\"${crosspoint.version}\"
  -DENABLE_SERIAL_LOG
  -DLOG_LEVEL=1 ; Set log level to info for release builds

[env:gh_release_rc]
extends = base, firmware_tuned_c3
build_flags =
  ${base.build_flags}
  -DFREEINK_DEVICE_X4=1
  -DFREEINK_DEVICE_X3=1
  -DCROSSPOINT_VERSION=\"${crosspoint.version}-rc+${sysenv.CROSSPOINT_RC_HASH}\"
  -DENABLE_SERIAL_LOG
  -DLOG_LEVEL=1 ; Set log level to info for release candidate builds

[env:slim]
extends = base, firmware_tuned_c3
build_flags =
  ${base.build_flags}
  -DFREEINK_DEVICE_X4=1
  -DFREEINK_DEVICE_X3=1
  -DCROSSPOINT_VERSION=\"${crosspoint.version}-slim\"
  ; serial output is disabled in slim builds to save space
  -UENABLE_SERIAL_LOG

; --- Seeed Sticky — ESP32-S3R8, 3.97" 800x480 SSD1677 + GT911 touch -----------
; Different MCU family than the C3 envs (one binary per family). The SDK
; auto-enables CAP_TOUCH (GT911) and the BQ27220 gauge for this device. The
; N16R8 board definition enables octal PSRAM.
;   pio run -e sticky -t upload
[env:sticky]
extends = base, firmware_tuned
board = esp32-s3-devkitc1-n16r8
board_build.mcu = esp32s3
build_flags =
  ${base.build_flags}
  -DFREEINK_DEVICE_STICKY=1
  -DENABLE_SERIAL_LOG
  -DCROSSPOINT_WAIT_FOR_USB_SERIAL
  -DLOG_LEVEL=2

[env:sticky-gh_release]
extends = base, firmware_tuned
board = esp32-s3-devkitc1-n16r8
board_build.mcu = esp32s3
build_flags =
  ${base.build_flags}
  -DFREEINK_DEVICE_STICKY=1
  -DCROSSPOINT_VERSION=\"${crosspoint.version}\"
  -DENABLE_SERIAL_LOG
  -DLOG_LEVEL=1 ; Set log level to info for release builds

[env:sticky-gh_release_rc]
extends = base, firmware_tuned
board = esp32-s3-devkitc1-n16r8
board_build.mcu = esp32s3
build_flags =
  ${base.build_flags}
  -DFREEINK_DEVICE_STICKY=1
  -DCROSSPOINT_VERSION=\"${crosspoint.version}-rc+${sysenv.CROSSPOINT_RC_HASH}\"
  -DENABLE_SERIAL_LOG
  -DLOG_LEVEL=1 ; Set log level to info for release candidate builds

; --- Xteink X4 Pro — ESP32-S3, 16MB flash / 8MB PSRAM, SSD1677 + GT911 --------
; The SDK profile supplies the X4 Pro pinout, display, touch controller, and
; capacitive Home key. USB Serial/JTAG is the normal USB personality so
; PlatformIO can monitor and flash the reader. USB Drive starts MSC only for
; that File Transfer activity, then reboots back to this default on exit.
;   pio run -e x4pro -t upload
[env:x4pro]
extends = base
board = esp32-s3-devkitc1-n16r8
board_build.mcu = esp32s3
board_build.arduino.memory_type = dio_opi
; Use the prebuilt dio_opi Arduino variant: its TinyUSB component is enabled
; for CDC and MSC. This profile deliberately extends base rather than
; firmware_tuned, whose custom SDK rebuild omits that component.
build_flags =
  ${base.build_flags}
  -DFREEINK_DEVICE_X4PRO=1
  -DFREEINK_CAP_USB_MSC=1
  -DBOARD_HAS_PSRAM
  -DUSB_PRODUCT=\"CrossPoint_X4_Pro\"
  -DUSB_MANUFACTURER=\"CrossPoint\"
  -DCROSSPOINT_VERSION=\"${crosspoint.version}-x4pro\"
  -DENABLE_SERIAL_LOG
  -DCROSSPOINT_WAIT_FOR_USB_SERIAL
  -DLOG_LEVEL=2
  ; X4 Pro SD is native SDMMC (1-bit), mounted through SdFat's block-device API.
  -DUSE_BLOCK_DEVICE_INTERFACE=1

; --- Xteink X4 Classic (X4C) ---------------------------------------------------
; Same ESP32-S3 board and display stack as the X4 Pro (SSD1677/UC8179/UC8279 auto-
; detected at boot) but buttons-only: no touchscreen and no frontlight, so the
; freed pins become four extra front buttons (two side page-turn keys + four bottom
; keys). Native 1-bit SDMMC + USB-MSC file transfer as on the X4 Pro; drops the
; frontlight flag. See freeink-sdk/docs/xteink-x4c-support.md.
;   pio run -e x4c -t upload
[env:x4c]
extends = base
board = esp32-s3-devkitc1-n16r8
board_build.mcu = esp32s3
board_build.arduino.memory_type = dio_opi
build_flags =
  ${base.build_flags}
  -DFREEINK_DEVICE_X4CLASSIC=1
  -DFREEINK_CAP_USB_MSC=1
  -DBOARD_HAS_PSRAM
  -DUSB_PRODUCT=\"CrossPoint_X4_Classic\"
  -DUSB_MANUFACTURER=\"CrossPoint\"
  -DCROSSPOINT_VERSION=\"${crosspoint.version}-x4c\"
  -DENABLE_SERIAL_LOG
  -DCROSSPOINT_WAIT_FOR_USB_SERIAL
  -DLOG_LEVEL=2
  ; X4C SD is native SDMMC (1-bit), mounted through SdFat's block-device API.
  -DUSE_BLOCK_DEVICE_INTERFACE=1

[env:x4c-gh_release]
extends = base
board = esp32-s3-devkitc1-n16r8
board_build.mcu = esp32s3
board_build.arduino.memory_type = dio_opi
build_flags =
  ${base.build_flags}
  -DFREEINK_DEVICE_X4CLASSIC=1
  -DFREEINK_CAP_USB_MSC=1
  -DBOARD_HAS_PSRAM
  -DUSB_PRODUCT=\"CrossPoint_X4_Classic\"
  -DUSB_MANUFACTURER=\"CrossPoint\"
  -DCROSSPOINT_VERSION=\"${crosspoint.version}\"
  -DENABLE_SERIAL_LOG
  -DLOG_LEVEL=1 ; Set log level to info for release builds
  -DUSE_BLOCK_DEVICE_INTERFACE=1

[env:x4c-gh_release_rc]
extends = base
board = esp32-s3-devkitc1-n16r8
board_build.mcu = esp32s3
board_build.arduino.memory_type = dio_opi
build_flags =
  ${base.build_flags}
  -DFREEINK_DEVICE_X4CLASSIC=1
  -DFREEINK_CAP_USB_MSC=1
  -DBOARD_HAS_PSRAM
  -DUSB_PRODUCT=\"CrossPoint_X4_Classic\"
  -DUSB_MANUFACTURER=\"CrossPoint\"
  -DCROSSPOINT_VERSION=\"${crosspoint.version}-rc+${sysenv.CROSSPOINT_RC_HASH}\"
  -DENABLE_SERIAL_LOG
  -DLOG_LEVEL=1 ; Set log level to info for release candidate builds
  -DUSE_BLOCK_DEVICE_INTERFACE=1

[env:x4pro-gh_release]
extends = base
board = esp32-s3-devkitc1-n16r8
board_build.mcu = esp32s3
board_build.arduino.memory_type = dio_opi
build_flags =
  ${base.build_flags}
  -DFREEINK_DEVICE_X4PRO=1
  -DFREEINK_CAP_USB_MSC=1
  -DBOARD_HAS_PSRAM
  -DUSB_PRODUCT=\"CrossPoint_X4_Pro\"
  -DUSB_MANUFACTURER=\"CrossPoint\"
  -DCROSSPOINT_VERSION=\"${crosspoint.version}\"
  -DENABLE_SERIAL_LOG
  -DLOG_LEVEL=1 ; Set log level to info for release builds
  -DUSE_BLOCK_DEVICE_INTERFACE=1

[env:x4pro-gh_release_rc]
extends = base
board = esp32-s3-devkitc1-n16r8
board_build.mcu = esp32s3
board_build.arduino.memory_type = dio_opi
build_flags =
  ${base.build_flags}
  -DFREEINK_DEVICE_X4PRO=1
  -DFREEINK_CAP_USB_MSC=1
  -DBOARD_HAS_PSRAM
  -DUSB_PRODUCT=\"CrossPoint_X4_Pro\"
  -DUSB_MANUFACTURER=\"CrossPoint\"
  -DCROSSPOINT_VERSION=\"${crosspoint.version}-rc+${sysenv.CROSSPOINT_RC_HASH}\"
  -DENABLE_SERIAL_LOG
  -DLOG_LEVEL=1 ; Set log level to info for release candidate builds
  -DUSE_BLOCK_DEVICE_INTERFACE=1

; --- M5Stack Paper Mono — ESP32-S3, SSD1683 800x480 + FT6336 touch + frontlight
; Power/reset plumbing runs through the M5PM1 PMIC and M5IOE1 expander; the SDK
; sequences them itself. Touch, frontlight, RTC, and other capabilities are
; selected by the Paper Mono BoardConfig profile.
; Extends base (not firmware_tuned): USB Drive needs the prebuilt dio_opi
; Arduino variant, whose TinyUSB component is enabled for CDC and MSC.
;   pio run -e papermono -t upload
[env:papermono]
extends = base
board = esp32-s3-devkitc1-n16r8
board_build.mcu = esp32s3
board_build.arduino.memory_type = dio_opi
build_flags =
  ${base.build_flags}
  -DFREEINK_DEVICE_PAPERMONO=1
  -DFREEINK_CAP_USB_MSC=1
  ; The SSD1683 grayscale target planes are batched in PSRAM.
  -DBOARD_HAS_PSRAM
  -DUSB_PRODUCT=\"CrossPoint_Paper_Mono\"
  -DUSB_MANUFACTURER=\"CrossPoint\"
  -DCROSSPOINT_VERSION=\"${crosspoint.version}-papermono\"
  -DENABLE_SERIAL_LOG
  -DCROSSPOINT_WAIT_FOR_USB_SERIAL
  -DLOG_LEVEL=2
  ; Native 1-bit SDMMC is mounted through SdFat's block-device interface.
  -DUSE_BLOCK_DEVICE_INTERFACE=1

[env:papermono-gh_release]
extends = base
board = esp32-s3-devkitc1-n16r8
board_build.mcu = esp32s3
board_build.arduino.memory_type = dio_opi
build_flags =
  ${base.build_flags}
  -DFREEINK_DEVICE_PAPERMONO=1
  -DFREEINK_CAP_USB_MSC=1
  -DBOARD_HAS_PSRAM
  -DUSB_PRODUCT=\"CrossPoint_Paper_Mono\"
  -DUSB_MANUFACTURER=\"CrossPoint\"
  -DCROSSPOINT_VERSION=\"${crosspoint.version}\"
  -DENABLE_SERIAL_LOG
  -DLOG_LEVEL=1 ; Set log level to info for release builds
  -DUSE_BLOCK_DEVICE_INTERFACE=1

[env:papermono-gh_release_rc]
extends = base
board = esp32-s3-devkitc1-n16r8
board_build.mcu = esp32s3
board_build.arduino.memory_type = dio_opi
build_flags =
  ${base.build_flags}
  -DFREEINK_DEVICE_PAPERMONO=1
  -DFREEINK_CAP_USB_MSC=1
  -DBOARD_HAS_PSRAM
  -DUSB_PRODUCT=\"CrossPoint_Paper_Mono\"
  -DUSB_MANUFACTURER=\"CrossPoint\"
  -DCROSSPOINT_VERSION=\"${crosspoint.version}-rc+${sysenv.CROSSPOINT_RC_HASH}\"
  -DENABLE_SERIAL_LOG
  -DLOG_LEVEL=1 ; Set log level to info for release candidate builds
  -DUSE_BLOCK_DEVICE_INTERFACE=1