Something went wrong. Try again.
🎥 Command line media player
Something went wrong. Try again.
at release/0.37
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983Introduction============
mpv provides access to its internals via the following means:
- options- commands- properties- events- hooks
The sum of these mechanisms is sometimes called command interface.
All of these are important for interfacing both with end users and API users(which include Lua scripts, libmpv, and the JSON IPC). As such, they constitutea large part of the user interface and APIs.
Also see compatibility.rst.
This document lists changes to them. New changes are added to the top. Usually,only incompatible or important changes are mentioned. New options/commands/etc.are not always listed.
Interface changes=================
::
--- mpv 0.37.0 --- - `--save-position-on-quit` and its associated commands now store state files in %LOCALAPPDATA% instead of %APPDATA% directory by default on Windows. - change `--subs-with-matching-audio` default from `no` to `yes` - change `--subs-fallback` default from `no` to `default` - add the `--hdr-peak-percentile` option - include `--hdr-peak-percentile` in the `gpu-hq` profile - change `--audiotrack-pcm-float` default from `no` to `yes` - add video-params/aspect-name - change type of `--sub-pos` to float - The remaining time printed in the terminal is now adjusted for speed by default. You can disable this with `--no-term-remaining-playtime`. - add `playlist-path` and `playlist/N/playlist-path` properties - add `--x11-wid-title` option - add `--libplacebo-opts` option - add `--audio-file-exts`, `--cover-art-auto-exts`, and `--sub-auto-exts` - change `slang` default back to NULL - remove special handling of the `auto` value from `--alang/slang/vlang` options - add `--subs-match-os-language` as a replacement for `--slang=auto` - add `always` option to `--subs-fallback-forced` - remove `auto` choice from `--sub-forced-only` - remove `auto-forced-only` property - rename `--sub-forced-only` to `--sub-forced-events-only` - remove `sub-forced-only-cur` property (`--sub-forced-events-only` is a replacement) - remove deprecated `video-aspect` property - add `--video-crop` - add `video-params/crop-[w,h,x,y]` - remove `--tone-mapping-mode` - change `--subs-fallback-forced` so that it works alongside `--slang` - add `--icc-3dlut-size=auto` and make it the default - add `--scale=ewa_lanczos4sharpest` - remove `--scale-wblur`, `--cscale-wblur`, `--dscale-wblur`, `--tscale-wblur` - remove `bcspline` filter (`bicubic` is now the same as `bcspline`) - rename `--cache-dir` and `--cache-unlink-files` to `--demuxer-cache-dir` and `--demuxer-cache-unlink-files` - enable `--correct-downscaling`, `--linear-downscaling`, `--sigmoid-upscaling` - `--cscale` defaults to `--scale` if not defined - change `--tscale` default to `oversample` - change `--dither-depth` to `auto` - deprecate `--profile=gpu-hq`, add `--profile=<fast|high-quality>` - change `--dscale` default to `hermite` - update defaults to `--hdr-peak-decay-rate=20`, `--hdr-scene-threshold-low=1.0`, `--hdr-scene-threshold-high=3.0` - update defaults to `--deband-threshold=48`, `--deband-grain=32` - add `--directory-mode=auto` and make it the default - remove deprecated `--profile=opengl-hq` - remove several legacy fallbacks for old deprecated options (now they will just error out like normal) - remove deprecated `drop-frame-count` and `vo-drop-frame-count` property aliases - remove the ability to write to the `display-fps` property (use `override-display-fps` instead) - writing the current value to playlist-pos will no longer restart playback (use `playlist-play-index` instead) - remove deprecated `--oaoffset`, `--oafirst`, `--ovoffset`, `--ovfirst`, `--demuxer-force-retry-on-eof`, `--fit-border` options - remove deprecated `--record-file` option - remove deprecated `--vf-defaults` and `--af-defaults` options - `--drm-connector` no longer allows selecting the card number (use `--drm-device` instead) - add `--title-bar` option - add `--window-corners` option - rename `--cdrom-device` to `--cdda-device` - remove `--scale-cutoff`, `--cscale-cutoff`, `--dscale-cutoff`, `--tscale-cutoff` - remove `--scaler-lut-size` - deprecate shared-script-properties (user-data is a replacement) - add `--backdrop-type` option - add `--window-affinity` option - `--config-dir` no longer forces cache and state files to also reside in there - deprecate `--demuxer-cue-codepage` in favor of `--metadata-codepage` - change the default of `metadata-codepage` to `auto` - add `playlist-next-playlist` and `playlist-prev-playlist` commands - change `video-codec` to show description or name, not both - deprecate `--cdda-toc-bias` option, offsets are always checked now - disable `--allow-delayed-peak-detect` by default - rename `--fps` to `--container-fps-override` - rename `--override-display-fps` to `--display-fps-override` - rename `--sub-ass-force-style` to `--sub-ass-style-overrides` - alias `--screenshot-directory` to `--screenshot-dir` - alias `--watch-later-directory` to `--watch-later-dir` - rename `--play-dir` to `--play-direction` - `--js-memory-report` is now used for enabling memory reporting for javascript scripts - drop support for `-del` syntax for list options - `--demuxer-hysteresis-secs` now respects `--cache-secs` and/or `--demuxer-readahead-secs` as well - add hdr metadata to `video-params` property - add `--target-gamut` - change the way display names are retrieved on macOS, usage of options and properties `--fs-screen-name`, `--screen-name` and `display-names` needs to be adjusted - remove OpenGL cocoa backend that was deprecated in 0.29 - remove `border`, `fullscreen`, `ontop`, `osd-level` and `pause` from default `--watch-later-options` - add `video-*` and `secondary-sub-visibility` to default `--watch-later-options` --- mpv 0.36.0 --- - add `--target-contrast` - Target luminance value is now also applied when ICC profile is used. `--icc-use-luma` has been added to use ICC profile luminance value. If target luminance and ICC luminance is not used, old behavior apply, defaulting to 203 nits. (Only applies for `--vo=gpu-next`) - `playlist/N/title` gets set upon opening the file if it wasn't already set and a title is available. - add the `--vo=kitty` video output driver, as well as the options `--vo-kitty-cols`, `--vo-kitty-rows`, `--vo-kitty-width`, `--vo-kitty-height`, `--vo-kitty-left`, `--vo-kitty-top`, `--vo-kitty-config-clear`, `--vo-kitty-alt-screen` and `--vo-kitty-use-shm` - add `--force-render` - add `--vo-sixel-config-clear`, `--vo-sixel-alt-screen` and `--vo-sixel-buffered` - add `--wayland-content-type` - deprecate `--vo-sixel-exit-clear` and alias it to `--vo-sixel-alt-screen` - deprecate `--drm-atomic` - add `--demuxer-hysteresis-secs` - add `--video-sync=display-tempo` - the `start` option is no longer unconditionally written by watch-later. It is still written by default but you may need to explicitly add `start` depending on how you have `--watch-later-options` configured. - add `--vd-lavc-dr=auto` and make it the default - add support for the fractional scale protocol in wayland - in wayland, hidpi window scaling now scales the window by the compositor's dpi scale factor by default (can be disabled with --no-hidpi-window-scale if fractional scaling support exists). - change --screenshot-tag-colorspace default value from `no` to `yes` - undeprecate vf_sub - add `--tone-mapping=st2094-40` and `--tone-mapping=st2094-10` - change `--screenshot-jxl-effort` default from `3` to `4`. - add `--tone-mapping-visualize` - change type of `--brightness`, `--saturation`, `--contrast`, `--hue` and `--gamma` to float. - add `platform` property - add `--auto-window-resize` - `--save-position-on-quit` and its associated commands now store state files in the XDG_STATE_HOME directory by default. This only has an effect on linux/bsd systems. - mpv now implictly saves cache files in XDG_CACHE_HOME by default. This only has an effect if the user enables options that would lead to cache being stored and only makes a difference on linux/bsd systems. - `--cache-on-disk` no longer requires explictly setting the `--cache-dir` option - add `--icc-cache` and `--gpu-shader-cache` options to control whether or not to save cache files for these features; explictly setting `--icc-cache-dir` and `--gpu-shader-cache` is no longer required - remove the `--tone-mapping-crosstalk` option - add `--gamut-mapping-mode=perceptual|relative|saturation|absolute|linear` - add `--corner-rounding` option - change `--subs-with-matching-audio` default from `yes` to `no` - change `--slang` default from blank to `auto` - add `--input-cursor-passthrough` option to allow pointer events to completely passthrough the mpv window - icc and gpu-shader cache are now saved by default (use --no-icc-shader-cache and --no-gpu-shader-cache to disable) - add `--directory-mode=recursive|lazy|ignore` - `--hwdec=yes` is now mapped to `auto-safe` rather than `auto` (also used by ctrl+h keybind) - add `--hdr-contrast-recovery` and `--hdr-contrast-smoothness` - include `--hdr-contrast-recovery` in the `gpu-hq` profile --- mpv 0.35.0 --- - add the `--vo=gpu-next` video output driver, as well as the options `--allow-delayed-peak-detect`, `--builtin-scalers`, `--interpolation-preserve` `--lut`, `--lut-type`, `--image-lut`, `--image-lut-type` and `--target-lut` along with it. - add `--target-colorspace-hint` - add `--tone-mapping-crosstalk` - add `--tone-mapping` options `auto`, `spline` and `bt.2446a` - add `--inverse-tone-mapping` - add `--gamut-mapping-mode`, replacing `--gamut-clipping` and `--gamut-warning` - add `--tone-mapping-mode`, replacing `--tone-mapping-desaturate` and `--tone-mapping-desaturate-exponent`. - add `dolbyvision` sub-parameter to `format` video filter - `--sub-visibility` no longer has any effect on secondary subtitles - add `film-grain` sub-parameter to `format` video filter - add experimental `--vo=dmabuf-wayland` video output driver - add `--x11-present` for controlling whether to use xorg's present extension - add `engine` option to the `rubberband` audio filter to support the new engine introduced in rubberband 3.0.0. Defaults to `finer` (new engine). - add `--wayland-configure-bounds` option - deprecate `--gamma-factor` - deprecate `--gamma-auto` - remove `--vulkan-disable-events` - add `--glsl-shader-opts` --- mpv 0.34.0 --- - deprecate selecting by card number with `--drm-connector`, add `--drm-device` which can be used instead - add `--screen-name` and `--fs-screen-name` flags to allow selecting the screen by its name instead of the index - add `--macos-geometry-calculation` to change the rectangle used for screen position and size calculation. the old behavior used the whole screen, which didn't take the menu bar and Dock into account. The new default behaviour includes both. To revert to the old behavior set this to `whole`. - add an additional optional `albumart` argument to the `video-add` command, which tells mpv to load the given video as album art. - undeprecate `--cache-secs` option - remove `--icc-contrast` and introduce `--icc-force-contrast`. The latter defaults to the equivalent of the old `--icc-contrast=inf`, and can instead be used to specifically set the contrast to any value. - add a `--watch-later-options` option to allow configuring which options quit-watch-later saves - make `current-window-scale` writeable and use it in the default input.conf - add `--input-builtin-bindings` flag to control loading of built-in key bindings during start-up (default: yes). - add ``track-list/N/image`` sub-property - remove `--opengl-restrict` option - js custom-init: use filename ~~/init.js instead of ~~/.init.js (dot) --- mpv 0.33.0 --- - add `--d3d11-exclusive-fs` flag to enable D3D11 exclusive fullscreen mode when the player enters fullscreen. - directories in ~/.mpv/scripts/ (or equivalent) now have special semantics (see mpv Lua scripting docs) - names starting with "." in ~/.mpv/scripts/ (or equivalent) are now ignored - js modules: ~~/scripts/modules.js/ is no longer used, global paths can be set with custom init (see docs), dir-scripts first look at <dir>/modules/ - the OSX bundle now logs to "~/Library/Logs/mpv.log" by default - deprecate the --cache-secs option (once removed, the cache cannot be limited by time anymore) - remove deprecated legacy hook API ("hook-add", "hook-ack"). Use either the libmpv API (mpv_hook_add(), mpv_hook_continue()), or the Lua scripting wrappers (mp.add_hook()). - improve how property change notifications are delivered on events and on hooks. In particular, a hook event is only returned to a client after all changes initiated before the hook point were delivered to the same client. In addition, it should no longer happen that events and property change notifications were interleaved in bad ways (it could happen that a property notification delivered after an event contained a value that was valid only before the event happened). - the playlist-pos and playlist-pos-1 properties now can return and accept -1, and are never unavailable. Out of range indexes are now accepted, but behave like writing -1. - the playlist-pos and playlist-pos-1 properties deprecate the current behavior when writing back the current value to the property: currently, this restarts playback, but in the future, it will do nothing. Using the "playlist-play-index" command is recommended instead. - add "playlist-play-index" command - add playlist-current-pos, playlist-playing-pos properties - Lua end-file events set the "error" field; this is deprecated; use the "file_error" instead for this specific event. Scripts relying on the "error" field for end-file will silently break at some point in the future. - remove deprecated --input-file option, add --input-ipc-client, which is vaguely a replacement of the removed option, but not the same - change another detail for track selection options (see --aid manpage entry) - reading loop-file property as native property or mpv_node will now return "inf" instead of boolean true (also affects loop option) - remove some --vo-direct3d-... options (it got dumbed down; use --vo=gpu) - remove video-params/plane-depth property (was too vaguely defined) - remove --video-sync-adrop-size option (implementation was changed, no replacement for what this option did) - undeprecate --video-sync=display-adrop - deprecate legacy auto profiles (profiles starting with "extension." and "protocol."). Use conditional auto profiles instead. - the "subprocess" command does not connect spawned processes' stdin to mpv's stdin anymore. Instead, stdin is connected to /dev/null by default. To get the old behavior, set the "passthrough_stdin" argument to true. - key/value list options do not accept ":" as item separator anymore, only ",". This means ":" is always considered part of the value. - remove deprecated --vo-vdpau-deint option - add `delete-watch-later-config` command to complement `write-watch-later-config` --- mpv 0.32.0 --- - change behavior when using legacy option syntax with options that start with two dashes (``--`` instead of a ``-``). Now, using the recommended syntax is required for options starting with ``--``, which means an option value must be strictly passed after a ``=``, instead of as separate argument. For example, ``--log-file f.txt`` was previously accepted and behaved like ``--log-file=f.txt``, but now causes an error. Use of legacy syntax that is still supported now prints a deprecation warning. --- mpv 0.31.0 --- - add `--resume-playback-check-mtime` to check consistent mtime when restoring playback state. - add `--d3d11-output-csp` to enable explicit selection of a D3D11 swap chain color space. - the --sws- options and similar now affect vo_image and screenshot conversion (does not matter as much for vo_gpu, which does most of this with shaders) - add a builtin "sw-fast" profile, which restores performance settings for software video conversion. These were switched to higher quality since mpv 0.30.0 (related to the previous changelog entry). This affects video outputs like vo_x11 and vo_drm, and screenshots, but not much else. - deprecate --input-file (there are no plans to remove this short-term, but it will probably eventually go away <- that was a lie) - deprecate --video-sync=display-adrop (might be removed if it's in the way; undeprecated or readded if it's not too much of a problem) - deprecate all input section commands (these will be changed/removed, as soon as mpv internals do not require them anymore) - remove deprecated --playlist-pos alias (use --playlist-start) - deprecate --display-fps, introduce --override-display-fps. The display-fps property now is unavailable if no VO exists (or the VO did not return a display FPS), instead of returning the option value in this case. The property will keep existing, but writing to it is deprecated. - the vf/af properties now do not reject the set value anymore, even if filter chain initialization fails. Instead, the vf/af options are always set to the user's value, even if it does not reflect the "runtime" vf/af chain. - the vid/aid/sid/secondary-sid properties (and their aliases: "audio", "video", "sub") will now allow setting any track ID; before this change, only IDs of actually existing tracks could be set (the restriction was active the MPV_EVENT_FILE_LOADED/"file-loaded" event was sent). Setting an ID for which no track exists is equivalent to disabling it. Note that setting the properties to non-existing tracks may report it as selected track for a small time window, until it's forced back to "no". The exact details how this is handled may change in the future. - remove old Apple Remote support, including --input-appleremote - add MediaPlayer support and remove the old Media Key event tap on macOS. this possibly also re-adds the Apple Remote support - the "edition" property now strictly returns the value of the option, instead of the runtime value. The new "current-edition" property needs to be queried to read the runtime-chosen edition. This is a breaking change for any users which expected "edition" to return the runtime-chosen edition at default settings (--edition=auto). - the "window-scale" property now strictly returns the value of the option, instead of the actual size of the window. The new "current-window-scale" property needs to be queried to read the value as indicated by the current window size. This is a breaking change. - explicitly deprecate passing more than 1 item to "-add" suffix in key/value options (for example --script-opts-add). This was actually always deprecated, like with other list options, but the option parser did not print a warning in this particular case. - deprecate -del for list options (use -remove instead, which is by content instead of by integer index) - if `--fs` is used but `--fs-screen` is not set, mpv will now use `--screen` instead. - change the default of --hwdec to "no" on RPI. The default used to be "mmal" specifically if 'Raspberry Pi support' was enabled at configure time (equivalent to --enable-rpi). Use --hwdec=mmal to get the old behavior. --- mpv 0.30.0 --- - add `--d3d11-output-format` to enable explicit selection of a D3D11 swap chain format. - rewrite DVB channel switching to use an integer value `--dvbin-channel-switch-offset` for switching instead of the old stream controls which are now gone. Cycling this property up or down will change the offset to the channel which was initially tuned to. Example for `input.conf`: `H cycle dvbin-channel-switch-offset up`, `K cycle dvbin-channel-switch-offset down`. - adapt `stream_dvb` to support writing to `dvbin-prog` at runtime and also to consistently use dvbin-configuration over URI parameters when provided - add `--d3d11-adapter` to enable explicit selection of a D3D11 rendering adapter by name. - rename `--drm-osd-plane-id` to `--drm-draw-plane`, `--drm-video-plane-id` to `--drm-drmprime-video-plane` and `--drm-osd-size` to `--drm-draw-surface-size` to better reflect what the options actually control, that the values they accept aren't actually internal DRM ID's (like with similar options in ffmpeg's KMS support), and that the video plane is only used when the drmprime overlay hwdec interop is active, with the video being drawn to the draw plane otherwise. - in addition to the above, the `--drm-draw-plane` and `--drm-drmprime-video-plane` options now accept either an integer index, or the values primary or overlay. `--drm-draw-plane` now defaults to primary and `--drm-drmprime-video-plane` defaults to overlay. This should be similar to previous behavior on most drivers due to how planes are usually sorted. - rename --opensles-frames-per-buffer to --opensles-frames-per-enqueue to better reflect its purpose. In the past it overrides the buffer size the AO requests (but not the default/value of the generic --audio-buffer option). Now it only guarantees that the soft buffer size will not be smaller than itself while setting the size per Enqueue. - add --opensles-buffer-size-in-ms, allowing user to tune the soft buffer size. It overrides the --audio-buffer option unless it's set to 0 (with the default being 250). - remove `--linear-scaling`, replaced by `--linear-upscaling` and `--linear-downscaling`. This means that `--sigmoid-upscaling` no longer implies linear light downscaling as well, which was confusing. - the built-in `gpu-hq` profile now includes` --linear-downscaling`. - support for `--spirv-compiler=nvidia` has been removed, leaving `shaderc` as the only option. The `--spirv-compiler` option itself has been marked as deprecated, and may be removed in the future. - split up `--tone-mapping-desaturate`` into strength + exponent, instead of only using a single value (which previously just controlled the exponent). The strength now linearly blends between the linear and nonlinear tone mapped versions of a color. - add --hdr-peak-decay-rate and --hdr-scene-threshold-low/high - add --tone-mapping-max-boost - ipc: require that "request_id" fields are integers. Other types are still accepted for compatibility, but this will stop in the future. Also, if no request_id is provided, 0 will be assumed. - mpv_command_node() and mp.command_native() now support named arguments (see manpage). If you want to use them, use a new version of the manpage as reference, which lists the definitive names. - edition and disc title switching will now fully reload playback (may have consequences for scripts, client API, or when using file-local options) - with the removal of the stream cache, the following properties and options were dropped: `cache`, `cache-size`, `cache-free`, `cache-used`, `--cache-default`, `--cache-initial`, `--cache-seek-min`, `--cache-backbuffer`, `--cache-file`, `--cache-file-size` - the --cache option does not take a number value anymore - remove async playback abort hack. This may make it impossible to abort playback if --demuxer-thread=no is forced. - remove `--macos-title-bar-style`, replaced by `--macos-title-bar-material` and `--macos-title-bar-appearance`. - The default for `--vulkan-async-compute` has changed to `yes` from `no` with the move to libplacebo as the back-end for vulkan rendering. - Remove "disc-titles", "disc-title", "disc-title-list", and "angle" properties. dvd:// does not support title ranges anymore. - Remove all "tv-..." options and properties, along with the classic Linux analog TV support. - remove "program" property (no replacement) - always prefer EGL over GLX, which helps with AMD/vaapi, but will break vdpau with --vo=gpu - use --gpu-context=x11 to be able to use vdpau. This does not affect --vo=vdpau or --hwdec=vdpau-copy. - remove deprecated --chapter option - deprecate --record-file - add `--demuxer-cue-codepage` - add ``track-list/N/demux-bitrate``, ``track-list/N/demux-rotation`` and ``track-list/N/demux-par`` property - Deprecate ``--video-aspect`` and add ``--video-aspect-override`` to replace it. (The `video-aspect` option remains unchanged.) --- mpv 0.29.0 --- - drop --opensles-sample-rate, as --audio-samplerate should be used if desired - drop deprecated --videotoolbox-format, --ff-aid, --ff-vid, --ff-sid, --ad-spdif-dtshd, --softvol options - fix --external-files: strictly never select any tracks from them, unless explicitly selected (this may or may not be expected) - --ytdl is now always enabled, even for libmpv - add a number of --audio-resample-* options, which should from now on be used instead of --af-defaults=lavrresample:... - deprecate --vf-defaults and --af-defaults. These didn't work with the lavfi bridge, so they have very little use left. The only potential use is with af_lavrresample (going to be deprecated, --audio-resample-... set its defaults), and various hw deinterlacing filters (like vf_vavpp), for which you will have to stop using --deinterlace=yes, and instead use the vf toggle commands and the filter enable/disable flag to customize it. - deprecate --af=lavrresample. Use the ``--audio-resample-...`` options to customize resampling, or the libavfilter ``--af=aresample`` filter. - add --osd-on-seek - remove outfmt sub-parameter from "format" video filter (no replacement) - some behavior changes in the video filter chain, including: - before, using an incompatible filter with hwdec would disable hwdec; now it disables the filter at runtime instead - inserting an incompatible filter with hwdec at runtime would refuse to insert the filter; now it will add it successfully, but disables the filter slightly later - some behavior changes in the audio filter chain, including: - a manually inserted lavrresample filter is not necessarily used for sample format conversion anymore, so it's pretty useless - changing playback speed will not respect --af-defaults anymore - having libavfilter based filters after the scaletempo or rubberband filters is not supported anymore, and may desync if playback speed is changed (libavfilter does not support the metadata for playback speed) - the lavcac3enc filter does not auto detach itself anymore; instead it passes through the data after converting it to the sample rate and channel configuration the ac3 encoder expects; also, if the audio format changes midstream in a way that causes the filter to switch between PCM and AC3 output, the audio output won't be reconfigured, and audio playback will fail due to libswresample being unable to convert between PCM and AC3 (Note: the responsible developer didn't give a shit. Later changes might have improved or worsened this.) - inserting a filter that changes the output sample format will not reconfigure the AO - you need to run an additional "ao-reload" command to force this if you want that - using "strong" gapless audio (--gapless-audio=yes) can fail if the audio formats are not convertible (such as switching between PCM and AC3 passthrough) - if filters do not pass through PTS values correctly, A/V sync can result over time. Some libavfilter filters are known to be affected by this, such as af_loudnorm, which can desync over time, depending on how the audio track was muxed (af_lavfi's fix-pts suboption can help). - remove out-format sub-parameter from "format" audio filter (no replacement) - --lavfi-complex now requires uniquely named filter pads. In addition, unconnected filter pads are not allowed anymore (that means every filter pad must be connected either to another filter, or to a video/audio track or video/audio output). If they are disconnected at runtime, the stream will probably stall. - rename --vo=opengl-cb to --vo=libmpv (goes in hand with the opengl-cb API deprecation, see client-api-changes.rst) - deprecate the OpenGL cocoa backend, option choice --gpu-context=cocoa when used with --gpu-api=opengl (use --vo=libmpv) - make --deinterlace=yes always deinterlace, instead of trying to check certain unreliable video metadata. Also flip the defaults of all builtin HW deinterlace filters to always deinterlace. - change vf_vavpp default to use the best deinterlace algorithm by default - remove a compatibility hack that allowed CLI aliases to be set as property (such as "sub-file"), deprecated in mpv 0.26.0 - deprecate the old command based hook API, and introduce a proper C API (the high level Lua API for this does not change) - rename the the lua-settings/ config directory to script-opts/ - the way the player waits for scripts getting loaded changes slightly. Now scripts are loaded in parallel, and block the player from continuing playback only in the player initialization phase. It could change again in the future. (This kind of waiting was always a feature to prevent that playback is started while scripts are only half-loaded.) - deprecate --ovoffset, --oaoffset, --ovfirst, --oafirst - remove the following encoding options: --ocopyts (now the default, old timestamp handling is gone), --oneverdrop (now default), --oharddup (you need to use --vf=fps=VALUE), --ofps, --oautofps, --omaxfps - remove --video-stereo-mode. This option was broken out of laziness, and nobody wants to fix it. Automatic 3D down-conversion to 2D is also broken, although you can just insert the stereo3d filter manually. The obscurity of 3D content doesn't justify such an option anyway. - change cycle-values command to use the current value, instead of an internal counter that remembered the current position. - remove deprecated ao/vo auto profiles. Consider using scripts like auto-profiles.lua instead. - --[c]scale-[w]param[1|2] and --tone-mapping-param now accept "default", and if set to that value, reading them as property will also return "default", instead of float nan as in previous versions --- mpv 0.28.0 --- - rename --hwdec=mediacodec option to mediacodec-copy, to reflect conventions followed by other hardware video decoding APIs - drop previously deprecated --heartbeat-cmd and --heartbeat--interval options - rename --vo=opengl to --vo=gpu - rename --opengl-backend to --gpu-context - rename --opengl-shaders to --glsl-shaders - rename --opengl-shader-cache-dir to --gpu-shader-cache-dir - rename --opengl-tex-pad-x/y to --gpu-tex-pad-x/y - rename --opengl-fbo-format to --fbo-format - rename --opengl-gamma to --gamma-factor - rename --opengl-debug to --gpu-debug - rename --opengl-sw to --gpu-sw - rename --opengl-vsync-fences to --swapchain-depth, and the interpretation slightly changed. Now defaults to 3. - rename the built-in profile `opengl-hq` to `gpu-hq` - the semantics of --opengl-es=yes are slightly changed -> now requires GLES - remove the (deprecated) alias --gpu-context=drm-egl - remove the (deprecated) --vo=opengl-hq - remove --opengl-es=force2 (use --opengl-es=yes --opengl-restrict=300) - the --msg-level option now affects --log-file - drop "audio-out-detected-device" property - this was unavailable on all audio output drivers for quite a while (coreaudio used to provide it) - deprecate --videotoolbox-format (use --hwdec-image-format, which affects most other hwaccels) - remove deprecated --demuxer-max-packets - remove most of the deprecated audio and video filters - remove the deprecated --balance option/property - rename the --opengl-hwdec-interop option to --gpu-hwdec-interop, and change some of its semantics: extend it take the strings "auto" and "all". "all" loads all backends. "auto" behaves like "all" for vo_opengl_cb, while on vo_gpu it loads nothing, but allows on demand loading by the decoder. The empty string as option value behaves like "auto". Old --hwdec values do not work anymore. This option is hereby declared as unstable and may change any time - its old use is deprecated, and it has very little use outside of debugging now. - change the --hwdec option from a choice to a plain string (affects introspection of the option/property), also affects some properties - rename --hwdec=rpi to --hwdec=mmal, same for the -copy variant (no backwards compatibility) - deprecate the --ff-aid, --ff-vid, --ff-sid options and properties (there is no replacement, but you can manually query the track property and use the "ff-index" field to find the mpv track ID to imitate this behavior) - rename --no-ometadata to --no-ocopy-metadata --- mpv 0.27.0 --- - drop previously deprecated --field-dominance option - drop previously deprecated "osd" command - remove client API compatibility handling for "script", "sub-file", "audio-file", "external-file" (these cases used to log a deprecation warning) - drop deprecated --video-aspect-method=hybrid option choice - rename --hdr-tone-mapping to --tone-mapping (and generalize it) - --opengl-fbo-format changes from a choice to a string. Also, its value will be checked only on renderer initialization, rather than when the option is set. - Using opengl-cb now always assumes 8 bit per component depth, and dithers to this size. Before, it tried to figure out the depth of the first framebuffer that was ever passed to the renderer. Having GL framebuffers with a size larger than 8 bit per component is quite rare. If you need it, set the --dither-depth option instead. - --lavfi-complex can now be set during runtime. If you set this in expectation it would be applied only after a reload, you might observe weird behavior. - add --track-auto-selection to help with scripts/applications that make exclusive use of --lavfi-complex. - undeprecate --loop, and map it from --loop-playlist to --loop-file (the deprecation was to make sure no API user gets broken by a sudden behavior change) - remove previously deprecated vf_eq - remove that hardware deinterlace filters (vavpp, d3d11vpp, vdpaupp) changed their deinterlacing-enabled setting depending on what the --deinterlace option or property was set to. Now, a filter always does what its filter options and defaults imply. The --deinterlace option and property strictly add/remove its own filters. For example, if you run "mpv --vf=vavpp --deinterlace=yes", this will insert another, redundant filter, which is probably not what you want. For toggling a deinterlace filter manually, use the "vf toggle" command, and do not set the deinterlace option/property. To customize the filter that will be inserted automatically, use --vf-defaults. Details how this works will probably change in the future. - remove deinterlace=auto (this was not deprecated, but had only a very obscure use that stopped working with the change above. It was also prone to be confused with a feature not implemented by it: auto did _not_ mean that deinterlacing was enabled on demand.) - add shortened mnemonic names for mouse button bindings, eg. mbtn_left the old numeric names (mouse_btn0) are deprecated - remove mouse_btn3_dbl and up, since they are only generated for buttons 0-2 (these now print an error when sent from the 'mouse' command) - rename the axis bindings to wheel_up/down/etc. axis scrolling and mouse wheel scrolling are now conceptually the same thing the old axis_up/down names remain as deprecated aliases --- mpv 0.26.0 --- - remove remaining deprecated audio device options, like --alsa-device Some of them were removed in earlier releases. - introduce --replaygain... options, which replace the same functionality provided by the deprecated --af=volume:replaygain... mechanism. - drop the internal "mp-rawvideo" codec (used by --demuxer=rawvideo) - rename --sub-ass-style-override to --sub-ass-override, and rename the `--sub-ass-override=signfs` setting to `--sub-ass-override=scale`. - change default of --video-aspect-method to "bitstream". The "hybrid" method (old default) is deprecated. - remove property "video-params/nom-peak" - remove option --target-brightness - replace vf_format's `peak` suboption by `sig-peak`, which is relative to the reference white level instead of in cd/m^2 - renamed the TRCs `st2084` and `std-b67` to `pq` and `hlg` respectively - the "osd" command is deprecated (use "cycle osd-level") - --field-dominance is deprecated (use --vf=setfield=bff or tff) - --really-quiet subtle behavior change - the deprecated handling of setting "no-" options via client API is dropped - the following options change to append-by-default (and possibly separator): --script also, the following options are deprecated: --sub-paths => --sub-file-paths the following options are deprecated for setting via API: "script" (use "scripts") "sub-file" (use "sub-files") "audio-file" (use "audio-files") "external-file" (use "external-files") (the compatibility hacks for this will be removed after this release) - remove property `vo-performance`, and add `vo-passes` as a more general replacement - deprecate passing multiple arguments to -add/-pre options (affects the vf/af commands too) - remove --demuxer-lavf-cryptokey. Use --demux-lavf-o=cryptokey=<hex> or --demux-lavf-o=decryption_key=<hex> instead (whatever fits your situation). - rename --opengl-dumb-mode=no to --opengl-dumb-mode=auto, and make `no` always disable it (unless forced on by hardware limitation). - generalize --scale-clamp, --cscale-clamp etc. to accept a float between 0.0 and 1.0 instead of just being a flag. A value of 1.0 corresponds to the old `yes`, and a value of 0.0 corresponds to the old `no`. --- mpv 0.25.0 --- - remove opengl-cb dxva2 dummy hwdec interop (see git "vo_opengl: remove dxva2 dummy hwdec backend") - remove ppm, pgm, pgmyuv, tga choices from the --screenshot-format and --vo-image-format options - the "jpeg" choice in the option above now leads to a ".jpg" file extension - --af=drc is gone (you can use e.g. lavfi/acompressor instead) - remove image_size predefined uniform from OpenGL user shaders. Use input_size instead - add --sub-filter-sdh - add --sub-filter-sdh-harder - remove --input-app-events option (macOS) - deprecate most --vf and --af filters. Only some filters not in libavfilter will be kept. Also, you can use libavfilter filters directly (e.g. you can use --vf=name=opts instead of --vf=lavfi=[name=opts]), as long as the libavfilter filter's name doesn't clash with a mpv builtin filter. In the long term, --vf/--af syntax might change again, but if it does, it will switch to libavfilter's native syntax. (The above mentioned direct support for lavfi filters still has some differences, such as how strings are escaped.) If this happens, the non-deprecated builtin filters might be moved to "somewhere else" syntax-wise. - deprecate --loop - after a deprecation period, it will be undeprecated, but changed to alias --loop-file - add --keep-open-pause=no - deprecate --demuxer-max-packets - change --audio-file-auto default from "exact" to "no" (mpv won't load files with the same filename as the video, but different extension, as audio track anymore) --- mpv 0.24.0 --- - deprecate --hwdec-api and replace it with --opengl-hwdec-interop. The new option accepts both --hwdec values, as well as named backends. A minor difference is that --hwdec-api=no (which used to be the default) now actually does not preload any interop layer, while the new default ("") uses the value of --hwdec. - drop deprecated --ad/--vd features - drop deprecated --sub-codepage syntax - rename properties: - "drop-frame-count" to "decoder-frame-drop-count" - "vo-drop-frame-count" to "frame-drop-count" The old names still work, but are deprecated. - remove the --stream-capture option and property. No replacement. (--record-file might serve as alternative) - add --sub-justify - add --sub-ass-justify - internally there's a different way to enable the demuxer cache now it can be auto-enabled even if the stream cache remains disabled --- mpv 0.23.0 --- - remove deprecated vf_vdpaurb (use "--hwdec=vdpau-copy" instead) - the following properties now have new semantics: - "demuxer" (use "current-demuxer") - "fps" (use "container-fps") - "idle" (use "idle-active") - "cache" (use "cache-percent") - "audio-samplerate" (use "audio-params/samplerate") - "audio-channels" (use "audio-params/channel-count") - "audio-format" (use "audio-codec-name") (the properties equivalent to the old semantics are in parentheses) - remove deprecated --vo and --ao sub-options (like --vo=opengl:...), and replace them with global options. A somewhat complete list can be found here: https://github.com/mpv-player/mpv/wiki/Option-replacement-list#mpv-0210 - remove --vo-defaults and --ao-defaults as well - remove deprecated global sub-options (like -demuxer-rawaudio format=...), use flat options (like --demuxer-rawaudio-format=...) - the --sub-codepage option changes in incompatible ways: - detector-selection and fallback syntax is deprecated - enca/libguess are removed and deprecated (behaves as if they hadn't been compiled-in) - --sub-codepage=<codepage> does not force the codepage anymore (this requires different and new syntax) - remove --fs-black-out-screens option for macOS - change how spdif codecs are selected. You can't enable spdif passthrough with --ad anymore. This was deprecated; use --audio-spdif instead. - deprecate the "family" selection with --ad/--vd forcing/excluding codecs with "+", "-", "-" is deprecated as well - explicitly mark --ad-spdif-dtshd as deprecated (it was done so a long time ago, but it didn't complain when using the option) --- mpv 0.22.0 --- - the "audio-device-list" property now sets empty device description to the device name as a fallback - add --hidpi-window-scale option for macOS - add audiounit audio output for iOS - make --start-time work with --rebase-start-time=no - add --opengl-early-flush=auto mode - add --hwdec=vdpau-copy, deprecate vf_vdpaurb - add tct video output for true-color and 256-color terminals --- mpv 0.21.0 --- - unlike in older versions, setting options at runtime will now take effect immediately (see for example issue #3281). On the other hand, it will also do runtime verification and reject option changes that do not work (example: setting the "vf" option to a filter during playback, which fails to initialize - the option value will remain at its old value). In general, "set name value" should be mostly equivalent to "set options/name value" in cases where the "name" property is not deprecated and "options/name" exists - deviations from this are either bugs, or documented as caveats in the "Inconsistencies between options and properties" manpage section. - deprecate _all_ --vo and --ao suboptions. Generally, all suboptions are replaced by global options, which do exactly the same. For example, "--vo=opengl:scale=nearest" turns into "--scale=nearest". In some cases, the global option is prefixed, e.g. "--vo=opengl:pbo" turns into "--opengl-pbo". Most of the exact replacements are documented here: https://github.com/mpv-player/mpv/wiki/Option-replacement-list - remove --vo=opengl-hq. Set --profile=opengl-hq instead. Note that this profile does not force the VO. This means if you use the --vo option to set another VO, it won't work. But this also means it can be used with opengl-cb. - remove the --vo=opengl "pre-shaders", "post-shaders" and "scale-shader" sub-options: they were deprecated in favor of "user-shaders" - deprecate --vo-defaults (no replacement) - remove the vo-cmdline command. You can set OpenGL renderer options directly via properties instead. - deprecate the device/sink options on all AOs. Use --audio-device instead. - deprecate "--ao=wasapi:exclusive" and "--ao=coreaudio:exclusive", use --audio-exclusive instead. - subtle changes in how "--no-..." options are treated mean that they are not accessible under "options/..." anymore (instead, these are resolved at parsing time). This does not affect options which start with "--no-", but do not use the mechanism for negation options. (Also see client API change for API version 1.23.) - rename the following properties - "demuxer" -> "current-demuxer" - "fps" -> "container-fps" - "idle" -> "idle-active" - "cache" -> "cache-percent" the old names are deprecated and will change behavior in mpv 0.23.0. - remove deprecated "hwdec-active" and "hwdec-detected" properties - deprecate the ao and vo auto-profiles (they never made any sense) - deprecate "--vo=direct3d_shaders" - use "--vo=direct3d" instead. Change "--vo=direct3d" to always use shaders by default. - deprecate --playlist-pos option, renamed to --playlist-start - deprecate the --chapter option, as it is redundant with --start/--end, and conflicts with the semantics of the "chapter" property - rename --sub-text-* to --sub-* and --ass-* to --sub-ass-* (old options deprecated) - incompatible change to cdda:// protocol options: the part after cdda:// now always sets the device, not the span or speed to be played. No separating extra "/" is needed. The hidden --cdda-device options is also deleted (it was redundant with the documented --cdrom-device). - deprecate --vo=rpi. It will be removed in mpv 0.23.0. Its functionality was folded into --vo=opengl, which now uses RPI hardware decoding by treating it as a hardware overlay (without applying GL filtering). Also to be changed in 0.23.0: the --fs flag will be reset to "no" by default (like on the other platforms). - deprecate --mute=auto (informally has been since 0.18.1) - deprecate "resume" and "suspend" IPC commands. They will be completely removed in 0.23.0. - deprecate mp.suspend(), mp.resume(), mp.resume_all() Lua scripting commands, as well as setting mp.use_suspend. They will be completely removed in 0.23.0. - the "seek" command's absolute seek mode will now interpret negative seek times as relative from the end of the file (and clamps seeks that still go before 0) - add almost all options to the property list, meaning you can change options without adding "options/" to the property name (a new section has been added to the manpage describing some conflicting behavior between options and properties) - implement changing sub-speed during playback - make many previously fixed options changeable at runtime (for example --terminal, --osc, --ytdl, can all be enable/disabled after mpv_initialize() - this can be extended to other still fixed options on user requests) --- mpv 0.20.0 --- - add --image-display-duration option - this also means that image duration is not influenced by --mf-fps anymore in the general case (this is an incompatible change) --- mpv 0.19.0 --- - deprecate "balance" option/property (no replacement) --- mpv 0.18.1 --- - deprecate --heartbeat-cmd - remove --softvol=no capability: - deprecate --softvol, it now does nothing - --volume, --mute, and the corresponding properties now always control softvol, and behave as expected without surprises (e.g. you can set them normally while no audio is initialized) - rename --softvol-max to --volume-max (deprecated alias is added) - the --volume-restore-data option and property are removed without replacement. They were _always_ internal, and used for watch-later resume/restore. Now --volume/--mute are saved directly instead. - the previous point means resuming files with older watch-later configs will print an error about missing --volume-restore-data (which you can ignore), and will not restore the previous value - as a consequence, volume controls will no longer control PulseAudio per-application value, or use the system mixer's per-application volume processing - system or per-application volume can still be controlled with the ao-volume and ao-mute properties (there are no command line options) --- mpv 0.18.0 --- - now ab-loops are active even if one of the "ab-loop-a"/"-b" properties is unset ("no"), in which case the start of the file is used if the A loop point is unset, and the end of the file for an unset B loop point - deprecate --sub-ass=no option by --ass-style-override=strip (also needs --embeddedfonts=no) - add "hwdec-interop" and "hwdec-current" properties - deprecated "hwdec-active" and "hwdec-detected" properties (to be removed in mpv 0.20.0) - choice option/property values that are "yes" or "no" will now be returned as booleans when using the mpv_node functions in the client API, the "native" property accessors in Lua, and the JSON API. They can be set as such as well. - the VO opengl fbo-format sub-option does not accept "rgb" or "rgba" anymore - all VO opengl prescalers have been removed (replaced by user scripts) --- mpv 0.17.0 --- - deprecate "track-list/N/audio-channels" property (use "track-list/N/demux-channel-count" instead) - remove write access to "stream-pos", and change semantics for read access - Lua scripts now don't suspend mpv by default while script code is run - add "cache-speed" property - rename --input-unix-socket to --input-ipc-server, and make it work on Windows too - change the exact behavior of the "video-zoom" property - --video-unscaled no longer disables --video-zoom and --video-aspect To force the old behavior, set --video-zoom=0 and --video-aspect=0 --- mpv 0.16.0 --- - change --audio-channels default to stereo (use --audio-channels=auto to get the old default) - add --audio-normalize-downmix - change the default downmix behavior (--audio-normalize-downmix=yes to get the old default) - VO opengl custom shaders must now use "sample_pixel" as function name, instead of "sample" - change VO opengl scaler-resizes-only default to enabled - add VO opengl "interpolation-threshold" suboption (introduces new default behavior, which can change e.g. ``--video-sync=display-vdrop`` to the worse, but is usually what you want) - make "volume" and "mute" properties changeable even if no audio output is active (this gives not-ideal behavior if --softvol=no is used) - add "volume-max" and "mixer-active" properties - ignore --input-cursor option for events injected by input commands like "mouse", "keydown", etc. --- mpv 0.15.0 --- - change "yadif" video filter defaults --- mpv 0.14.0 --- - vo_opengl interpolation now requires --video-sync=display-... to be set - change some vo_opengl defaults (including changing tscale) - add "vsync-ratio", "estimated-display-fps" properties - add --rebase-start-time option This is a breaking change to start time handling. Instead of making start time handling an aspect of different options and properties (like "time-pos" vs. "playback-time"), make it dependent on the new option. For compatibility, the "time-start" property now always returns 0, so code which attempted to handle rebasing manually will not break. --- mpv 0.13.0 --- - remove VO opengl-cb frame queue suboptions (no replacement) --- mpv 0.12.0 --- - remove --use-text-osd (useless; fontconfig isn't a requirement anymore, and text rendering is also lazily initialized) - some time properties (at least "playback-time", "time-pos", "time-remaining", "playtime-remaining") now are unavailable if the time is unknown, instead of just assuming that the internal playback position is 0 - add --audio-fallback-to-null option - replace vf_format outputlevels suboption with "video-output-levels" global property/option; also remove "colormatrix-output-range" property - vo_opengl: remove sharpen3/sharpen5 scale filters, add sharpen sub-option --- mpv 0.11.0 --- - add "af-metadata" property --- mpv 0.10.0 --- - add --video-aspect-method option - add --playlist-pos option - add --video-sync* options "display-sync-active" property "vo-missed-frame-count" property "audio-speed-correction" and "video-speed-correction" properties - remove --demuxer-readahead-packets and --demuxer-readahead-bytes add --demuxer-max-packets and --demuxer-max-bytes (the new options are not replacement and have very different semantics) - change "video-aspect" property: always settable, even if no video is running; always return the override - if no override is set, return the video's aspect ratio - remove disc-nav (DVD, BD) related properties and commands - add "option-info/<name>/set-locally" property - add --cache-backbuffer; change --cache-default default to 75MB the new total cache size is the sum of backbuffer and the cache size specified by --cache-default or --cache - add ``track-list/N/audio-channels`` property - change --screenshot-tag-colorspace default value - add --stretch-image-subs-to-screen - add "playlist/N/title" property - add --video-stereo-mode=no to disable auto-conversions - add --force-seekable, and change default seekability in some cases - add vf yadif/vavpp/vdpaupp interlaced-only suboptions Also, the option is enabled by default (Except vf_yadif, which has it enabled only if it's inserted by the deinterlace property.) - add --hwdec-preload - add ao coreaudio exclusive suboption - add ``track-list/N/forced`` property - add audio-params/channel-count and ``audio-params-out/channel-count props. - add af volume replaygain-fallback suboption - add video-params/stereo-in property - add "keypress", "keydown", and "keyup" commands - deprecate --ad-spdif-dtshd and enabling passthrough via --ad add --audio-spdif as replacement - remove "get_property" command - remove --slave-broken - add vo opengl custom shader suboptions (source-shader, scale-shader, pre-shaders, post-shaders) - completely change how the hwdec properties work: - "hwdec" now reflects the --hwdec option - "hwdec-detected" does partially what the old "hwdec" property did (and also, "detected-hwdec" is removed) - "hwdec-active" is added - add protocol-list property - deprecate audio-samplerate and audio-channels properties (audio-params sub-properties are the replacement) - add audio-params and audio-out-params properties - deprecate "audio-format" property, replaced with "audio-codec-name" - deprecate --media-title, replaced with --force-media-title - deprecate "length" property, replaced with "duration" - change volume property: - the value 100 is now always "unchanged volume" - with softvol, the range is 0 to --softvol-max, without it is 0-100 - the minimum value of --softvol-max is raised to 100 - remove vo opengl npot suboption - add relative seeking by percentage to "seek" command - add playlist_shuffle command - add --force-window=immediate - add ao coreaudio change-physical-format suboption - remove vo opengl icc-cache suboption, add icc-cache-dir suboption - add --screenshot-directory - add --screenshot-high-bit-depth - add --screenshot-jpeg-source-chroma - default action for "rescan_external_files" command changes --- mpv 0.9.0 ---